Freestanding tub faucets are available in a variety of styles and sizes. Before you install one, you need to take a few considerations into account. First, make sure you have enough floor space. In addition, make sure you have enough space to fit the pipes leading to the faucet. Freestanding faucets can have pipes that sit outside of the tub or emerge from the floor behind the tub.

Installation

Before installing your new free-standing tub faucet, make sure you shut off the water supply in your tub. This can be done with a shut-off valve on the faucet or the main water valve. Then, follow the manufacturer’s installation instructions for more detailed instructions. Ensure that the spout is positioned at the appropriate height for your tub.

First, determine the exact dimensions of your freestanding tub. This is important because the floor mount faucet’s spout must be high enough to go over the rim of the tub. You should also take into consideration the thickness of your tub’s rim. Generally, the spout should hang over the rim by a few inches. This way, the water will fall where it should. When you are done installing your free-standing tub faucet, double-check your measurements to make sure the installation is done properly.

Cost

Freestanding tub faucets are a popular trend right now, but they can be expensive. You can expect to pay at least $100 for materials, and as much as $700 for a professional to install it. These faucets add an air of sophistication to any bathroom. Most of them are freestanding, which allows you to remove them without damaging the foundation.

Installation can be a DIY project or part of a bigger project. If you’re performing the work yourself, the cost may be between $45 and $400. It will require several tools and can take two to four hours to complete. Some of these tools are available for sale, or you can rent them if you don’t have them.

Safety

When installing a freestanding tub faucet, be sure to follow proper safety precautions. You’ll need to take special care to make sure the faucet does not strike any objects below it. A freestanding tub may have no holes to insert a faucet, so it’s best to use one that is designed for that purpose. Freestanding tub faucets typically have connections that sit below the floor, which makes them better suited for bathrooms with wood floors or second stories.

Another thing to consider is stability. A freestanding tub faucet should be secure and not sway or wobble when you pull on it. A wobbly faucet will be more difficult to use, and it can be dangerous. You don’t want your faucet to fall onto you or break any plumbing connections.

Single-riser or dual-riser

When choosing a freestanding tub faucet, there are many factors to consider. You need to choose the right height for your tub, and you will need to install wood support two to three inches below the floor surface. Make sure that the wood support is at least 2″ thick, and that the mounting flange is level with the finished floor surface. Next, you will need to turn the faucet to the inside of the tub to measure how far away the spout is from the side of the tub. After determining the proper height, temporarily mount the faucet base and the spout using screws. Be sure to tighten the screws only slightly to ensure that everything is level.

Choose a faucet with multiple functions. If you plan to use a freestanding tub faucet for multiple purposes, you will need to consider the different options available. Single-riser faucets are typically more affordable, and dual-riser faucets have additional features like temperature controls.

Need for a professional

You should hire a professional if you plan on installing a freestanding tub faucet. This type of faucet requires an adjusted valve for its supply line to ensure consistent water pressure. Moreover, a swivel head is recommended, as this makes it easier to clean the tub.

When installing a free-standing tub faucet, you should consider the location of the pipes. The placement of the faucet is crucial as it can change the design and layout of the tub. You should consider a professional’s opinion before making a final decision.

Tools needed

Before you begin installing a free-standing tub faucet, be sure you have all the tools you need. You will need an adjustable wrench, level, plumber’s putty, and tub caulk. Then, follow the manufacturer’s instructions to determine the location of the hot and cold water lines. You can also look for the tub faucet’s color code to determine which part of the tub to mount the faucet.

If you have a floor-mounted bathtub faucet, you will need to reinforce the floor beneath the tub. This will require basic carpentry skills, but it will give you more workspace. Also, you will need to use a special tool known as a diverter to switch the flow of water between the Tub Spout and Hand Shower.

Finishes available

There are a variety of finishes available for free-standing tub faucets. They can be wall-mounted, floor-mounted, or tub faucet mounts. The finishes that you choose will depend on your style and personal tastes. Consider the type of tub you have. If you have a tub that stands up, a wall-mounted faucet is a great choice.

For a contemporary look, a PVD Satin Brass finish is an attractive choice. The high-volume spout is complemented by a single-setting hand shower. The fine details make this finish a great option, as it complements a variety of modern and contemporary styling. It also has a ceramic disc cartridge and a diverter knob, so you can adjust the volume of the water and the temperature.

 

Call Now Button